Reduction / Inserts for CLEAN K1 carbon fork from thru axle to standard on vertical dropouts. Made for standard diameter 10mm axles like hubs which are supplied on CLEAN X1 bikes. Perfect if you need replace rear wheel with standard rear wheel without thru axle hub.
reduction / inserts for CLEAN K1 carbon fork from thru axle to standard on vertical dropouts
made for standard diameter 10mm axles like hubs which are supplied on CLEAN X1 bikes
perfect if you need replace front thru axle wheel for standard front wheel without thru axle hub
clamping to the fork with a 3mm inbus key as well as inserts for fixed axle
weight: 7g (pair)
The CLEAN K1 fork has a leg spacing of 104mm instead of 100mm. If you are replacing the thru axle inserts with a vertical axle and fitting the fork with a 100mm hub spacing, you will also need to purchase the CLEAN front hub spacing washers to replace the original washers on the CLEAN hub (with the classic bolt-on axle). These new washers will then delineate the 4mm space that would otherwise be left vacant and the hub could not be tightened properly.
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.